Product Details
Product Introduction
VOICE XPON 1GE+ 1FE+ 1POT
Nepstech fiber optic modem or XPON ONU(1GE+1FE+1POTS )meets telecom operators FTTO (office), FTTD (Desk), FTTH(Home) broadband speed, SOHO broadband access, video surveillance, and other requirements and designs XPON Gigabit Ethernet products. The box is based on the mature Gigabit XPON technology, highly reliable and easy to maintain, with guaranteed QOS for different services. And it is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.Good third-party compatibility when used with third-party OLTs such as Huawei/ZTE/ Fiberhome/BDCOM OLT.
Product photo show
Special Features
- Plug and play, features auto-detecting, auto-configuration, and auto firmware upgrade.
- Integrated OAM remote configuration and maintenance function.
- Support rich QinQ VLAN functions and IGMP Snooping multicast features.
- Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.
- Support NAT, Firewall functions.
- Support IPv4 and IPv6 dual stack.
- Integrated line testing compliant with GR-909 on POTS.
Download Document
Technical parameters
|
Indicator |
Description |
||
|
1 |
Power |
Power status |
On: The ONT is power on; |
|
|
|
|
Off: The ONT is Power off; |
|
2 |
PON |
ONU Register |
On: Success to register to OLT; Blinking: In process of registering to OLT; Off: In process of registering to OLT; |
|
3 |
LOS |
XPON optical signals |
Blinking: Optical power lower than receiver sensitivity ; Off: Optical in normal |
|
4 |
Phone |
Tel status |
On: Success to register to SIP Server; Off: In process of registering to SIP Server; |
|
5 |
LAN1~LAN2 |
LAN port status |
On: Ethernet connection is normal; Blinking: Data is being transmitted through the Ethernet port; Off: Ethernet connection is not set up; |
Specification
|
echnical item |
1GE+1FE+1POTS XPON ONU |
|
PON interface |
1 E/GPON port Wavelength:Tx1310nm,Rx 1490nm SC/UPC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
|
LAN interface |
1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
|
POTS interface |
1 FXS, RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according to GR-909 |
|
LED |
For Status of Power, PON, LOS,Phone,INTERNET,LAN 1,LAN2 |
|
Operating condition |
Temperature: 0??+50? Humidity: 10%?90%?non-condensing? |
|
Storing condition |
Temperature : -30??+60? Humidity :10%?90%?non-condensing? |
|
Power supply |
DC 12V,1A/1.5A |
|
Power consumption |
≤7W |
|
Dimension |
110mm×90mm×25mm?L×W×H? |