Product Details
Product Introduction
NTPL-EDW419P
This manual applies to fiber amplifier. It mainly describes the performance characteristics, technical parameters, installation and debugging, common troubleshooting, and other related content of the product.In order to ensure that the equipment can be successfully installed and safely operated, please read this manual carefully before installing and debugging the equipment. And the installation and debugging should be strictly according to the specified steps on the manual to avoid unnecessary damage to equipment or accident harm to the operator. Any questions, please contact with us in time
Product photo show
Special Features
- Built-in opticalFWDM,it can transmit broadband network and CATV together.
- Adopts ErYb Co-doped double-clad fiber technology;
- CATV input ports: 1 optional
- OLT input ports:4-32 optional
- Com Output ports: 4-32 optional;
- Optical output power: total output up to 15W（41dBm）;
- Low noise figure: <6dB when input is 0dBm;
- Perfect network management interface, in line with standard SNMP network management;
- Intelligent temperature control system makes the power consumption lower;
Download Document
Technical parameters
|
Item |
Unit |
Technique parameters |
Remark |
|||||||||||||||||||||
|
Operating bandwidth |
nm |
1545 - 1565 |
|
|||||||||||||||||||||
|
Optical input power range |
dBm |
-3 - +10 |
Max range: -10-+10 |
|||||||||||||||||||||
|
Optical Switching time |
ms |
≤ 5 |
|
|||||||||||||||||||||
|
Maximum optical output power |
dBm |
41 |
|
|||||||||||||||||||||
|
Output power stability |
dBm |
±0.5 |
|
|||||||||||||||||||||
|
Noise figure |
dB |
≤ 6.0 |
Optical input power 0dBm, λ=1550nm |
|||||||||||||||||||||
|
Return loss |
Input |
dB |
≥ 45 |
|
||||||||||||||||||||
|
Output |
dB |
≥ 45 |
|
|||||||||||||||||||||
|
Optical Connector Type |
|
CATV IN:SC/APC, PON:SC/PC OR LC/PC COM:SC/APC OR LC/APC |
|
|||||||||||||||||||||
|
PON to COM port insertion loss |
|
≤ 1.0 |
dBm |
|||||||||||||||||||||
|
C/N |
dB |
≥ 50 |
Test condition according to GT/T 184-2002. |
|||||||||||||||||||||
|
C/CTB |
dB |
≥ 63 |
||||||||||||||||||||||
|
C/CSO |
dB |
≥ 63 |
||||||||||||||||||||||
|
Power supply voltage |
V |
A:AC100V - 260V
(50 Hz~60Hz) |
|
|||||||||||||||||||||