NEPS: NTPL-EDW819P

Product Introduction

NTPL-EDW819P

This manual applies to fiber amplifier. It mainly describes the performance characteristics, technical parameters, installation and debugging, common troubleshooting, and other related content of the product.In order to ensure that the equipment can be successfully installed and safely operated, please read this manual carefully before installing and debugging the equipment. And the installation and debugging should be strictly according to the specified steps on the manual to avoid unnecessary damage to equipment or accident harm to the operator. Any questions, please contact with us in time.

Product photo show

Special Features

Built-in opticalFWDM,it can transmit broadband network and CATV together.
Adopts ErYb Co-doped double-clad fiber technology;
CATV input ports: 1 optional
OLT input ports:4-32 optional
Com Output ports: 4-32 optional;
Optical output power: total output up to 15Wï¼ˆ41dBmï¼‰;
Low noise figure: <6dB when input is 0dBm;
Perfect network management interface, in line with standard SNMP network management;
Intelligent temperature control system makes the power consumption lower;

Download Document

Download

Technical parameters

Item

Unit

Technique parameters

Remark

Operating bandwidth

1545 - 1565

Optical input power range

dBm

-3 - +10

Max range: -10-+10

Optical Switching time

≤ 5

Maximum optical output power

dBm

Output power stability

dBm

±0.5

Noise figure

≤ 6.0

Optical input power 0dBm, λ=1550nm

Return loss

Input

≥ 45

Output

≥ 45

Optical Connector Type

CATV IN:SC/APC,

PON:SC/PC OR LC/PC COM:SC/APC OR LC/APC

PON to COM port insertion loss

≤ 1.0

dBm

C/N

≥ 50

Test condition according to

GT/T 184-2002.

C/CTB

≥ 63

C/CSO

≥ 63

Power supply voltage

A:AC100V - 260V

(50 Hz~60Hz)

Item		Unit	Technique parameters	Remark
Operating bandwidth		nm	1545 - 1565
Optical input power range		dBm	-3 - +10	Max range: -10-+10
Optical Switching time		ms	≤ 5
Maximum optical output power		dBm	41
Output power stability		dBm	±0.5
Noise figure		dB	≤ 6.0	Optical input power 0dBm, λ=1550nm
Return loss	Input	dB	≥ 45
Return loss	Output	dB	≥ 45
Optical Connector Type			CATV IN:SC/APC, PON:SC/PC OR LC/PC COM:SC/APC OR LC/APC
PON to COM port insertion loss			≤ 1.0	dBm
C/N		dB	≥ 50	Test condition according to GT/T 184-2002.
C/CTB		dB	≥ 63
C/CSO		dB	≥ 63
Power supply voltage		V	A:AC100V - 260V (50 Hz~60Hz)

Product Details