Product Details
Product Introduction
8 PORTS EPON OLT 10G WITH DUAL POWER SUPPLY
Model No. NTPL-OLTEPN810G
The 4-port series of products are high integrated, medium capacity EPON OLT switching equipment for operators' access and enterprise park, security video surveillance and other networking scenarios. This product follows IEEE802.3ah technology standard, the equipment provides uplink 4 gigabit electric port and 4 gigabit SFP interface, downlink 4 gigabit EPON optical port. The maximum light splitting ratio of each EPON port is 1: 64, and the system can support 256ONU, to meet the requirements of EPON OLT. The system has good openness, large capacity, high reliability and complete software functions. It is widely used in front-end network coverage, private network construction, video surveillance, enterprise network park, Internet of things, residential network optical fiber access network construction.
Product photo show
Special Features
- Aggregation layer switch. Layer wire-speed forwarding, support for rich layerprotocol.
- 16K MAC address table.
- 8uplink ports, port aggregation through the largest available 8G uplink bandwidth.
- Complete network management functions
- Support flexible DBA, up and down traffic speed.
- Support IP ToS, IEEE802.1Q
- Port-based traffic control, traffic shaping.
- Support ONU automatic identification, auto-discovery, and auto-registration.
- Single link to support the automatic loop-back test function.
- VLAN powerful features, including VLAN Stacking, Trunk, Translation.
- Flexible and controllable multicast support, support IGMP snooping.
- Support ACL
Download Document
Technical parameters
|
Model |
04PON |
|||||||||||||||||||||||
|
DDR |
256M |
|||||||||||||||||||||||
|
FLASH |
16M |
|||||||||||||||||||||||
|
Size (L*W*H) |
Product size:442mm×260mm×44mm |
|||||||||||||||||||||||
|
|
Package size:520mm×372mm×87mm |
|||||||||||||||||||||||
|
Weight |
<5kg |
|||||||||||||||||||||||
|
Uplink |
QTY |
8 |
||||||||||||||||||||||
|
Copper |
4*10/100/1000Mauto-negotiable ,RJ45 |
|||||||||||||||||||||||
|
SFP |
4 SFP/SFP+ slots |
|||||||||||||||||||||||
|
PON |
QTY |
4 |
||||||||||||||||||||||
|
PhysicalInterface |
4 SFP slots |
|||||||||||||||||||||||
|
Connector Type |
1000BASE-PX20+ |
|||||||||||||||||||||||
|
Max splitting ratio |
1:64 |
|||||||||||||||||||||||
|
Management Ports |
1*10/100/1000Mauto-negotiable outband port 1CONSOLE port |
|||||||||||||||||||||||
|
Power Input |
AC: 100V～240V AC 47/63Hz DC: -36V～-72V DC |
|||||||||||||||||||||||
|
|
IEEE 802.3ah EPON |
|||||||||||||||||||||||
|
|
IEEE802.3(10Base-T) |
|||||||||||||||||||||||
|
|
IEEE802.3u(100Base-TX) |
|||||||||||||||||||||||
|
|
IEEE802.3z（1000BASE-X） |
|||||||||||||||||||||||
|
|
IEEE802.3ab（1000Base-T） |
|||||||||||||||||||||||
|
Support standard |
IEEE802.1Q(VLAN) |
|||||||||||||||||||||||
|
|
IEEEE802.1d(STP) |
|||||||||||||||||||||||
|
|
IEEEE802.1W(RSTP) |
|||||||||||||||||||||||
|
|
IEEE802.1p(COS) |
|||||||||||||||||||||||
|
|
IEEE802.1x(Port Control) |
|||||||||||||||||||||||
|
|
IEEE802.3x（flow-control） Each OLT interface supports at most 64 ONU； Transmission distance of each OLT is at most 20Km |
|||||||||||||||||||||||
|
PON function |
Support auto register and confirm Blacklist and whitelist onu DBA configure |
|||||||||||||||||||||||
|
Layer 2 function |
VLAN,QinQ,link convergency, broadcast strom control Support at most 4094 VLAN;performance statisticï¼› 16K MAC address;mac address management Port mirror |
|||||||||||||||||||||||
|
Security |
Limit quantity of maximum user at each port Port violation Packe storm control ACL access control based on data stream Encrytion of PON port transmitting data Support 802.1X authentication
|
|||||||||||||||||||||||